Today, in any roof, you can see snow holder - protective elements, which do not allow a sharp descent of snow from the roof.

The avalanche-like gathering of snow masses does not bode well for either the design itself, or the people under it, or the parked cars. The avalanche also cuts everything in its path, starting with antennas and ending with improperly installed gutters. To avoid such negative consequences, snow holders are installed on the roofs. Usually, for this purpose, snow holders are installed to the entrance, the sections above the windows or going out onto the pedestrian parts and etc.  Thus, snow covers are one of the most important elements of the roof, which ensure its safety.

Pipe(tubular) snow-holder, perhaps, the most common type of snow retention. Its simple construction based on two pipes, connected together by special fasteners, is able to contain the fall of a large layer of snow. If the volume of snow is critical, then only parts of it will fall through this structure. That is, at least the damage will be minimized. They are mainly made of high-strength steel. Mostly they are used on the roof of metal roofing, profiled sheets and seamed roofs.

Snow holder’s mounting is not very difficult. Each type of snow retention has its own fineness of installation. Tubular snow holders on the roof of the corrugated sheet are fastened through the waves of roofing sheets.

In company "Arantsk" you can purchase galvanized tubular snow holders, which are made from steel square 20x20 (GOST 8645-68, 10704 / 10705-80 СТ 3 ПС). Galvanized snow holder developed with the unique chemical composition of powder paints and innovative technology of the painting process, which provide a high quality protective and decorative layer in any weather and climate conditions. The continuous zinc surface without cracking, peeling and discoloration persists for 20 years.

The length of the pipe(tubular)  snow holder is 2 m.