Factory: 1 building, 1-st st, Noragavit
Corrugated Sheet W 18 is manufactured from PPGI sheets according to:
GOST EN 10326-DX51D
Stuff: Korea (20 years' factory warranty for paint quality)
1. Steel Sheet
2.Z 225-275
3.Passivation layer
4.Primer 10 micron
5.Polyester 25 micron
6.Protective Laequer
7.Sheet’s thickness 0.40-0.50 mm
8. Sheet’s Width 1250 mm
Name | նկար | GOST | Sheet Thickness mm | Sheet Width mm | Sheet Mounting Width mm | 1 m2 Weight | M/U |
---|---|---|---|---|---|---|---|
Pre -Painted corrugated sheet W 18 | EN 10326-DX51D | 0.45 | 1150 | 1050 | 3.840 | m2 | |
Pre -Painted corrugated sheet W 18 | EN 10326-DX51D | 0.47 | 1150 | 1050 | 4.010 | m2 | |
Pre -Painted corrugated sheet W 18 | EN 10326-DX51D | 0.50 | 1150 | 1050 | 4.266 | m2 | |
Pre -Painted corrugated sheet W 18 | EN 10326-DX51D | 0.45 (matt) | 1150 | 1050 | 3.840 | m2 | |
Pre -Painted corrugated sheet W 18 | EN 10326-DX51D | 0.47 (matt) | 1150 | 1050 | 4.010 | m2 | |
Pre -Painted corrugated sheet W 18 | EN 10326-DX51D | 0.50 (matt) | 1150 | 1050 | 4.266 | m2 | |
Pre -Painted corrugated sheet W 18 | EN 10326-DX51D | 0.50 CAMOFLAGE | 1150 | 1050 | 4.266 | m2 | |
Pre -Painted corrugated sheet W 18 | EN 10346-DX51D,EN10143 | 0.40 MULTI GLOS | 1150 | 1050 | 3.413 | m2 | |
Pre -Painted corrugated sheet W 18 | EN 10326-DX51D | 0.50 MULTI GLOS | 1150 | 1050 | 4.266 | m2 |
Galvanized corrugated sheet W18 is manufactured according to TU 1122-079-02494680-01. For When we are manufacturing galvanized corrugated sheet W18,we use cold rolled thin- galvanized steel sheet is used in according to GOST 10326-DX51D.
Corrugated Sheet W18 is produced with a wavy or trapezoidal surface. The distance between the waves is 92 mm, and the trapezoid pitch is 288 mm. To increase the load-bearing capacity of the trapezoidal profile, due to the large step of the trapezoid, it has additional stiffeners. High tightness of longitudinal joints is achieved by the device of a special capillary groove along the edge of narrow profile corrugations. Due to the successful combination of profile characteristics, the scope of application of W18- profiled sheeting is very wide in construction.
Company “Arantsk” offers Korean high quality super polyester PPGI sheets with polymer coating The thickness of the PPGI sheets starts from 0.40-0.50mm,the length of corrugated sheet is cutting with the required length.In our company you can find more than 30 colors of ral catalog. We offer both; glossy and matte.
We provide 20-year guarantee of the quality of the paint, which indicates that the paint will not sink and not decrease in any climatic conditions.