Roofing Sheets and steel products, from the manufacturer

LOCATION ON MAP

Factory: 1 building, 1-st st, Noragavit

GALVANIZED SHEET PRE-PAINTED SHEET Whole range
Metal Tile Cascade
Metal Tile Cascade

Metal Tile Cascade

Metal Tile Cascade is manufactured from PPGI sheets according to:
GOST EN 10326-DX51D
Stuff: Korea (20 years' factory warranty for paint quality)
1.Steel Sheet
2.Z 225-275
3.Passivation layer
4.Primer 10 micron
5.Polyester 25 micron
6.Protective Lacquer
7.Sheet’s thickness 0.40-0.50 mm
8. Sheet’s Width  1250 mm

Name նկար GOST Sheet Thickness mm Sheet Width mm Sheet Mounting Width mm 1 m2 Weight M/U
Metal Tile Cascade EN 10326-DX51D 0.45 1150 1060 3.840 m2
Metal Tile Cascade EN 10326-DX51D 0.47 1150 1060 4.010 m2
Metal Tile Cascade EN 10326-DX51D 0.50 1150 1060 4.266 m2
Metal Tile Cascade EN 10326-DX51D 0.45 (matt) 1150 1060 3.840 m2
Metal Tile Cascade EN 10326-DX51D 0.47 (matt) 1150 1060 4.010 m2
Metal Tile Cascade EN 10326-DX51D 0.50 (matt) 1150 1060 4.266 m2
Metal Tile Cascade EN 10326-DX51D 0.50 (Camouflage) 1150 1060 4.266 m2
Metal Tile Cascade EN 10326-DX51D 0.40 MULTI GLOS 1150 1060 3.413 m2
Metal Tile Cascade EN 10326-DX51D 0.50 MULTI GLOS 1150 1060 4.266 m2
Metal Tile Cascade EN 10326-DX51D 0.50 (two tone) 1150 1060 4.266 m2

Metal tile cascade is a galvanized sheet of steel, which is coated with a layer of polymer coating, performing both protective and decorative function.

For the production of cascade sheets series ,is used  metal with a thickness of 0.40-0.5 mm. Profile height 18 mm, wave height 25 mm, wave pitch 350 mm. The appearance of the metal and convenient for mounting sheet sizes are laid in the production. The material obtained by the stamping method acquires an attractive wave in the form of elongated rectangles with clearly defined faces. It’s the form that distinguishes the cascade from other types of metal tile. Looking at the photos of houses, which roofs are covered with cascade sheets, you can see a pattern with perpendicular curves, reminiscent of chocolate bars. The form of stamping is determined not only by the design decision. The edges of the wave increase the stiffness of the sheet, which allows you to reduce its weight. These characteristics have a positive effect during installation and during operation. The houses,which  roofs are coverd metal tile cascade, are lightweight, exerting less pressure on the walls and base of the building.

The company "Aranck" offers a galvanized sheet with a polymer coating, which is imported from Korea. The thickness of the sheet starts from 0.4 to 0.5mm, the length of the profiled sheet is cut to the customer with the required length. In our catalog you can find more than 30 color shades, both glossy and matte.

The thickness of the PPGI sheets starts from 0.40-0.50mm; the length of corrugated sheet is cutting with the required length. In our company you can find more than 30 colors of ral catalog. We offer both; glossy and matte.
We provide 20-year guarantee of the quality of the paint, which indicates that the paint will not sink and not decrease in any climatic conditions.