Roofing Sheets and steel products, from the manufacturer

LOCATION ON MAP

Factory: 1 building, 1-st st, Noragavit

GALVANIZED SHEET PRE-PAINTED SHEET Whole range
Galvanized corrugated Sheet KP 75
Galvanized corrugated Sheet KP 75

Galvanized corrugated Sheet KP 75

Corrugated Sheet KP 75 is
manufactured from galvanized steel sheet according to:
GOST EN 10346-DX51D,EN10143
Stuff  Russia,Kazakhstan,China
1. Steel Sheet
2. Zn180 and  200 mg
3.GI sheet
thickness0.50-1 mm
3. GI sheet width`  1250 mm

Name նկար GOST Sheet Thickness mm Sheet Width mm Sheet Mounting Width mm 1 m2 Weight M/U
Galvanized corrugated Sheet KP 75 EN 10346-DX51D,EN10143 0.5 800 700 6.133 m2
Galvanized corrugated Sheet KP 75 EN 10346-DX51D,EN10143 0.55 800 700 6.746 m2
Galvanized corrugated Sheet KP 75 EN 10346-DX51D,EN10143 0.6 800 700 7.359 m2
Galvanized corrugated Sheet KP 75 EN 10346-DX51D,EN10143 0.65 800 700 7.973 m2
Galvanized corrugated Sheet KP 75 EN 10346-DX51D,EN10143 0.7 800 700 8.586 m2
Galvanized corrugated Sheet KP 75 EN 10346-DX51D,EN10143 0.8 800 700 9.813 m2
Galvanized corrugated Sheet KP 75 EN 10346-DX51D,EN10143 0.9 800 700 11.039 m2
Galvanized corrugated Sheet KP 75 EN 10346-DX51D,EN10143 1 800 700 12.266 m2

Most types of corrugated sheets are universal in their application. For example, corrugated sheets C18 wall sheeting is often used as a roofing material, and caring corrugated sheets  H35 is often used for mounting various wall fences. But when building high-span industrial and civil buildings, wall and roofing materials are required that can withstand very high static and dynamic loads. This is especially important when installing objects in regions with a large snow cover and frequent strong winds.

It is to such materials that the corrugated sheet H75-750 applies. This profile is often called self-supporting, since its own rigidity and strength allow it to withstand very high loads with a minimum number of intermediate supports. H75 - corrugated board, which can cover the roofs of a very large area with the most minimal slopes. Thus, at angles of roof inclination of 6-8 °, reference runs can be installed no more often than every 4 m.
 In company "Arantsk" you can purchase galvanized corrugated sheet H 75 with a thickness from 0.50 to 01 mm. The length of the corrugated sheet KP 75 is cutting to the customer  required length.