Roofing Sheets and steel products, from the manufacturer

LOCATION ON MAP

Factory: 1 building, 1-st st, Noragavit

GALVANIZED SHEET PRE-PAINTED SHEET Whole range
Galvanized corrugated sheet KP 60
Galvanized corrugated sheet KP 60

Galvanized corrugated sheet KP 60

Corrugated sheet KP 60 is manufactured from galvanized steel sheet according to:
GOST EN 10346-DX51D,EN10143
Stuff  Russia, Kazakhstan, China
1. Steel Sheet
2. Zn180 and  200 mg
3.GI sheet thickness 0.50-1 mm
4.GI sheet width` 1000 and 1250 mm

Name նկար GOST Sheet Thickness mm Sheet Width mm Sheet Mounting Width mm 1 m2 Weight M/U
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 0.50 900 800 5.451 m2
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 0.53 900 800 5.778 m2
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 0.55 900 800 5.997 m2
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 0.6 900 800 6.542 m2
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 0.65 900 800 7.087 m2
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 0.7 900 800 7.632 m2
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 0.8 900 800 8.772 m2
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 0.9 900 800 9.813 m2
Galvanized corrugated sheet KP 60 EN 10346-DX51D,EN10143 1 900 800 10.903 m2

Galvanized corrugated sheet H60 belongs to the group of profiled sheets with the highest bearing capacity. Corrugated sheet H60-845 is made of galvanized cold-rolled steel according to GOST EN 10346-DX51D, EN 10143. The manufacturing and technical characteristics for the application of this sheet profile comply with the requirements of GOST 24045-94. The profiled H-60 ​​differs from other grades of corrugated board with the height of trapezium profile. It is the height of the wave or the corrugation that determines the main characteristic of these materials - their load-bearing capacity. The prototype H60-845 can withstand very high static and dynamic loads. This allows it to be used not only for the installation of prefabricated buildings and the construction of individual houses, but also for the construction of large industrial facilities. The relatively small weight of H60 corrugated board allows easy and quick installation of roofing coverings of any area, and its high strength makes it possible to cover spans up to 3.0-4.0 meters without additional intermediate supports.
 In company "Arantsk" you can purchase galvanized corrugated sheet HC 60 with a thickness from 0.50 to 0.8 mm. The length of the corrugated sheet is cutting to the customer  required length.