ENG
ՀԱՅ
РУСPRODUCTS
Range
Steel Sheet
Steel Pipe
Steel Pipe Elbow
Steel Square Tube
Steel Channel
Steel I-Beam
Steel Angle
Steel T-profile
Steel Round Bar
Steel Square Bar
Steel Hexagon Bar
Steel Strip
Electrod
Steel Rebar
Wire Rod
Steel Rebar Screw
Wires
Edgeb Boards
Bitumen
Glass Wool
Scaffold Couper
Plastic Tank
Construction Nails
Blade
Clamb
LOCATION ON MAP
Factory: 1 building, 1-st st, Noragavit
Galvanized сorrugated sheet KP 18
Corrugated sheet KP 18 is manufactured from galvanized steel sheet according to:
GOST EN 10346-DX51D,EN10143
Stuff Russia, Kazakhstan, China
1. Steel Sheet
2. Zn 180 and 200 mg
3.GI sheet thickness 0.25-0.90 mm
3. GI sheet width` 1000 and 1250 mm
| Name | նկար | GOST | Sheet Thickness mm | Sheet Width mm | Sheet Mounting Width mm | 1 m2 Weight | M/U |
|---|---|---|---|---|---|---|---|
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.25 | 920 | 850 | 2.133 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.27 | 920 | 850 | 2.304 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.30 | 920 | 850 | 2.560 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.32 | 920 | 850 | 2.730 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.35 | 920 | 850 | 2.986 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.37 | 920 | 850 | 3.157 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.40 | 920 | 850 | 3.413 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.42 | 920 | 850 | 3.584 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.45 | 920 | 850 | 3.840 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.47 | 920 | 850 | 4.010 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.50 | 920 | 850 | 4.266 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.53 | 920 | 850 | 4.522 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.55 | 920 | 850 | 4.963 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.60 | 920 | 850 | 5.120 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.70 | 920 | 850 | 5.973 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.80 | 920 | 850 | 6.826 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.90 | 1150 | 1080 | 7.679 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.30 | 1150 | 1080 | 2.560 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.32 | 1150 | 1080 | 2.986 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.35 | 1150 | 1080 | 3.157 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.37 | 1150 | 1080 | 3.413 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.40 | 1150 | 1080 | 3.584 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.42 | 1150 | 1080 | 3.840 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.45 | 1150 | 1080 | 4.010 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.47 | 1150 | 1080 | 4.266 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.50 | 1150 | 1080 | 4.522 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.53 | 1150 | 1080 | 4.693 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.55 | 1150 | 1080 | 5.120 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.60 | 1150 | 1080 | 5.546 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.65 | 1150 | 1080 | 5.973 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0.70 | 1150 | 1080 | 6.826 | m2 |
| Galvanized сorrugated sheet KP 18 |  |
EN 10346-DX51D,EN10143 | 0,80 | 1150 | 1080 | 6,826 | m2 |
Galvanized corrugated sheet KP18 is manufactured according to TU 1122-079-02494680-01. When we are manufacturing galvanized corrugated sheet KP18,we use cold rolled thin- galvanized steel sheet according to GOST EN 10346-DX51D, EN 10143.
Corrugated Sheet KP18 is produced with a wavy or trapezoidal surface. The distance between the waves is 92 mm, and the trapezoid pitch is 288 mm. To increase the load-bearing capacity of the trapezoidal profile, due to the large step of the trapezoid, it has additional stiffeners. High tightness of longitudinal joints is achieved by the device of a special capillary groove along the edge of narrow profile corrugations. Thanks to a successful combination of profile characteristics, the scope of application of corrugated board KP18- in construction is very wide.
In the company "Arantsk" you can purchase galvanized corrugated sheet KP18 with a thickness from 0.27 to 0.8mm. The length of the corrugated sheet is cut to the customer with the required length.